Shop Internationally at Sears
※ Download: Midi cable for keyboard
Step To connect the keyboard using a USB connection or MIDI to MIDI connection, connect one end of the USB or MIDI cord to the appropriate port on your PC. Archived from on 2012-11-30. Step Configure your keyboard depending on your particular software. In the years immediately after the 1983 ratification of the MIDI specification, MIDI features were adapted to several early computer platforms.
The two keyboards need to have midi channels set to channel 1 for the top master and channel 2 for the bottom sub manual. MIDI sequencers typically are operated by transport features modeled after those of. The very cheap unbranded ones can be very temperamental. If you have bought a branded interface then check the manual, and maybe post a support request to the manufacturer to make sure you have installed it correctly.
Shop Internationally at Sears - Some large manufacturers of MIDI devices use modified MIDI in-only DIN 5-pin sockets with the metallic conductors intentionally omitted at pin positions 1, 2, and 3 so that the maximum voltage isolation is obtained. As the Axiom is a USB controller keyboard, I am not sure why you would wish to use the MIO with it?
Your complete quick guide to connecting your keyboard. If you are just starting out with your home recording studio set-up, the first thing you may wish to do is find out how to connect a MIDI keyboard or digital piano up to your computer. This will enable you to use any interactive MIDI software products: quickly record virtual instrument tracks; write your own songs and music; learn to play and more. The MIDI Keyboard is often the heart of a small home recording studio, and the easiest and fastest way to enter bass lines, edit drum tracks, and of course record keyboard tracks. The other benefit of making a MIDI connection is if you want to. Once you have a MIDI connection you can benefit from interactive and. The quickest and easiest way to connect is using a USB-MIDI interface like one of the high quality branded devices below. We advise that you always stick with a well-known brand which is why we recommend any of the above. They all have good manufacturer support, up-to-date drivers and good guarantees in the event of any problems. If you want even more choice, then you can follow this link to find the current. No MIDI Keyboard Yet? Although you can get other kinds of MIDI controller, the keyboard is the most popular, widely available, and reasonably priced. If you have not yet got any kind of keyboard, then look first at. It will help you decide the best MIDI keyboard for you. Want To Record MIDI and Audio? If you not only want to use your keyboard or digital piano as a MIDI controller, but also want to record the sound of it, then do look read our post on how to. There are lots of recommendations in there for kit that will let you do BOTH. And put your keyboard right at the heart of your home recording studio. You first need to establish that it has got a means of connecting with your computer. Look to make sure it has a MIDI port. Musical Instrument Digital Interface is the protocol for communication between your keyboard and your PC. When you press a key the action is registered by the software you are using through the MIDI link. Most keyboards and Digital Pianos have MIDI in and out as standard. Look for ports like the one in the image below. So how do you connect from these ports to your PC? This is the simplest, high speed, no-fuss solution. Ideal if you want to use your laptop. If you can, buy a high quality branded one as you will get more support from the manufacturer to help with any setting up and they do work better and last longer. Roland, Alesis and M-Audio all make a USB-MIDI interface and all have excellent documentation and back-up. For example, the shown below Typical USB MIDI setup MIDI to MIDI Some soundcards come already equipped with MIDI ports like the ones shown above. If that is the case, all you require is a MIDI Cable 5 pin to 5 pin 3 metre. USB to USB Some of the newer keyboards now have a USB MIDI port — all you need is a standard USB cable to connect directly from the keyboard to the USB port of your PC or laptop. FAQ Why do MIDI IN jacks connect to MIDI OUT jacks? Surely it makes more sense to connect a MIDI IN jack to a MIDI IN jack. You want MIDI data to go out of your controller and in to your sound module. No, you connect the audio output to an audio mixer input. And then you connect the mixer outputs to the inputs of your amplifier. Same thing with MIDI. Or Want To Record Audio Tracks? This is just a quick guide if you simply want to hook up your keyboard to start using MIDI software. If you want a more in-depth set of tutorials, or you want to record the sound of your keyboard then you can either refer to our quick guide on , or see our which explains the difference between MIDI and Audio in detail and shows you step-by-step exactly what you need to either record your keyboard or use it as a MIDI controller. Disclosure: This is a professional review site and if you buy anything recommended through Music Repo, we may receive a commission, at no extra cost to you. We are experts in Music Technology and thoroughly research all the products and services we write about in our posts. We are independently owned and the opinions expressed here are our own. We are a participant in the Amazon Services LLC Associates Program and the Amazon EU Associates Programme, affiliate advertising programs designed to provide a means for us to earn fees by linking to Amazon. Hi jane, I have a Roland Bk7m which i am using with a yamaha keyboard via MIDI cables I use the USB to host cable of the Bk to connect to ipad for easy control Many of the newer keyboards now come without midi ports, only USB midi not the regular usb but midi to host connector featured on my bk7m Can i connect my soundmodule to these new keyboards via the usb host to usb host connection which i have not yet seen as standard cables? I have created a whole video series on how to connect and record your keyboard, especially look at the first video which explains the difference between MIDI and Audio and see if that helps. I have a Yamaha PSR540 now and have always wanted to add a bass pedal board so I can play my own bass lines, rather than rely on the automatic accompaniment. I have a small USB keyboard too, which works fine, but is no good for recording the piano music that I need to. Any help would be greatly appreciated! Idont know how to set this up. It consist of a M-audio oxygen 61 usb midi controller, edirol uex 25, roland xp60, roland sc880, behringer mixer, amplifier, 2 midi cable standard and midi to usb cable. My query here involves the playing of MIDI files of which I have quite a number mostly downloaded from the internet. They also exist on my computer in the same manner. Which is the better way to connect to the PSR—computer or USB stick? Can I also accomplish the following: can I mute a midi channel on the PSR and be able to play along with the midi file with, say, a grand piano patch or even a keyboard split? Enjoying this blog immensely, and, many, many thanks!!! There are a lot of questions there — I think the best thing to do is download the manual for the keyboard you are interested in and read the section on MIDI in detail. You should be able to have the files on your computer and play them back on the keyboard, and you should be able to fiddle with playback settings and MIDI channels in a DAW such as Reaper. Or you may find that laoding the files directly on the keyboard might work depending on what functionality is built into the keyboard. I am not familiar with those models in detail. I prefer using a computer interface to the small screens on keyboards. I guess the thing to do is get the keyboard and experiment. It has a great tone generator for live performances and then some. I want to use it as a midi controller; so, I connected it via USB to my MAC. I simply want to use Kontakt and have my board as the controller. I want to use the software. Also, would the sound then have to come from the headphone port on my MAC? Just from your keyboard? If so, then check the manual for your keyboard because I think there will be a setting to turn the local sounds off. Then you should just be able to use it as a controller. If the sounds are coming through your mac speakers from your keyboard then…. Think you might have to post specific questions to Yamaha support. I have the M-Audio USB Midisport Uno MIDI Interface that you mention above as being one of the better midi interfaces out there, and have connected it according to these instructions. Reaper is very good, and you can get that on a 60 day trial. Then if you like it the price is very reasonable. Mixcraft is also fantastic if you are quite new to all this and want something easy — you can try a free trial of that. I have got all leads in correctly but cannot seem to get any joy in setting sound up on my pc. I have tried making sure all input and output channels were set up correctly but to no avail. I had a macbook and still have a midi-usb cord, which worked great with Garageband—you just plug everything in and away it goes. Any suggestions you can provide? I will be 50 May 31, 2016 and decided I am going to follow my passion for music, peace, unity, illumination, etc. The problems is not my passion it is knowledge. I have a Native Instruments Komplete Audio 6 A6 as my audio interface. I have plugged my microphone into my A6 and Ableton recognizes it. I know I am so close to starting my music creation journey but I am stuck for I do not have the financial resources at this time to buy a controller listed on lists inside Ableton plus I have read lots of people using the X5 as a controller. Question 1: When plugged into the A6 do I still need to have Drivers for the X5 to be recognized by Ableton Live 8 or the NI products. I am running these programs on a Toshiba laptob with a CORE i7 processor and 8 Gigs of RAM. The last drivers Korg made for the X5 only worked for Windows NT, Windows 2000, and one other version of Windows but I am running Windows 8. Question 2: Does my A6 act as an interface that passes the MIDI signal from my X5 to the DAW and other packages through the USB connection of the A6 thus bypassing a need for drivers for the X5? Thank you for your time and any guidance you may provide. If you just wish to use the X5 as a controller then you should be able to connect a MIDI cable from the MIDI OUT of the keyboard to the MIDI IN of the A6 interface. Yes I believe the A6 should be acting as a MIDI interface. If you follow the instructions in our page on testing a MIDI device — and I know you have already looked at this — make sure you are running the tests using the A6 as the device. Hope that is of some help. Does it seem to have USB connectivity or just MIDI. If it is USB then it should work as a controller and details will be in the manual. If not then you will need a MIDI interface to get it to work. Buy a branded one that will work well on Windows 8 if you can. I have a Mac running Os X 10. Can you help me? Have you had a look at Reaper, you can try that out for free. Create a virtual instrument on a new track, select the TTS-1 which is a general MIDI instrument, arm it for recording and you should be able to hear yourself. For instance there is a lot of learning software that uses the MIDI connection to understand what you are playing and give you feedback. And yes you can transpose etc. But you will not be recording the SOUND of your computer, just your performance. So far I have seen lights and had sound to the Alesis, but I have not seen any indication of recognition through eithr pc or mac nor any programs I am running. I have only attached one midi cable from the yamaha to the Alesis. Neither my pc or mac are even recognizing anything is plugged in. I am running Wavelab LE7 for a program. Do I need two midi cables? Try connecting it directly to a USB port on computer, not via a hub. You need to establish that the IO2 is working and being recognised by the computer before going any further. Look in your control panel windows or system preferences mac and make sure that the IO2 is showing up as an available audio device, then set it to the default. Only start up your recording software after you have checked that the IO2 is being recognised. Finally it will be a choice of making sure that the IO2 is being chosen as the recording device in the software preferences, and checking the MIDI preferences to use the MIDI on the IO2. I have had to renew my PC. And can not get my Yamaha YPT-210 to play, anymore, on my PC. I am using Reaper software. I have a midi to USB cable. However I do not remember what make it is! Therefore I can not download the necessary software to get it to work. If it powers up, then it is possible you need to update your windows drivers. There is a link on the page to more information about this advanced troubleshooting. I want to use a roland RD 700 as my main board, then use the launchkey assignable encoders to control the functionality of main stage. Can I connect the RD 700 to the mac book via usb and the novation to the MacBook via the other available usb on my macbook. Mam I tried Spd-30 hooking up to PC with Sonar DAW. Can u please help me to find the solution. Well, I have the Keystation49 and was hoping to use it to run an old QSR sound module I just picked up. Thanks for being such a great answerer of questions!! New ones include the Samson Carbon 49, or the Alesis Q40 check that you buy the OLDER version of this which is still widely available. So; we have a talented and motivated little girl of 6, we have the keyboard, and we have a laptop that runs on windows XP…and we are trying to find a as simple as possible way and if possible with free software to get the keyboard making piano sounds when she pushes a key so she can study… any ideas what is the best way? I think I may need a good sound card. Can you help please. If there is reverb and chorus functionality in the software, then it is probably worth posting in the forum or searching there for help using the software. It is possible to buy interfaces with onboard DSP such as reverb and chorus, but I wonder if actually what you are asking is how the software works? Make sure the keyboard is selected as the MIDI device in the program. It is not the same as a MIDI cable. If your keyboard has MIDI ports then you can connect it using a USB-MIDI interface which is a different kind of cable. I think it will depend on what kind of keyboard it is. If you head to this page and select your Yamaha model from the drop down list you can find which software is available for it. On the other hand, if you want to use your keyboard as a controller and generate the sounds on your computer then you can do that in any DAW like Pro Tools, Cubase, Mixcraft, Sonar etc, or with standalone products like the Native Instruments Kontakt or Garritan Sounds. At one point if I clicked on the piano grid on my software the sound from my pc would play on my casio speakers but the data notes do not play from my casio to my pc so I cannot record midi. I have tried acid pro 7 and FL 10 but I still cannot get the midi to work. Or should I look up for a MIDI keyboard itself?? I own a Casino Lk-165 piano and a Windows 8 computer. Whenever I try to search online for a way, I get all sorts of confusing results… Any help would be appreciated. I hope they can help. You will need a different controller to avoid the use of a computer. I notice that this model has now been superseded by the Aleses V25, but the V25 is USB only. Still, I think there are plenty of Q25 still available. If you want a controller keyboard with extra pads, faders etc then the new Alesis VI25 has all that, full-sized keys, and that desired MIDI port Hope that helps. I am looking to very simply connect a controller to the computer and trigger sounds in real time so I can hear them via the computer audio output as I play. I have no interest in sequencing or recording, just in using the computer to expand the range of sounds I can play with my keyboard. Can you recommend the simplest program or tell me the name of what I am looking for? I really do appreciate your response. I can import MIDI into Audacity. I will take your suggestion and get a MIDI-USB interface. The example you showed at the beginning of this forum looks like it will do the trick. Now I am going to buy one new keyboard. I connect it to scarlett 2i4 audio interface and den to pc. In most of the new keyboard models I find only usb midi port. Thanks for your time, I really appreciate it. There is a link here to a good step-by-step guide to diagnosing and then troubleshooting, and at the bottom there is a link to the audio codec you may need to download and install if this proves to be the case after working through their suggestions. You seem to have helped people here with a similar problem that I have. I wonder if you can help me? I have a Quickshot Midi Composer keyboard. It is a midi-controller and sends midi out that can be received by computer sound cards. This technology is 20 yrs old. I no longer use a desktop computer. I use a Dell laptop that only has sound card inputs via mini-jack access. My problem is finding an adapter that will work in either case. I saw your example above that suggested a MIDI cable to USB connection. Is that the only option available? Will the MIDI controller signal reach the sound card through the USB connection, without modifying the signal values in any way? Thank you for your time to answer this. That line is is only for audio signals. I thought I should only hear that through an audio track. The reason I bought cubase was to make my Korg pieces better, I wanted the synth to sound better so I can start to send off the finished tracks to music libraries. I suppose I just want my compositions to sound more professional. Wondered if you have any advice? If you do want to record the actual Korg sounds, then you will need to make some kind of audio connection, so you may need to purchase an audio interface that will enable you to take the actual line output of the Korg and record to an audio track in Cubase. Thanks for your time! However, having a dedicated interface or USB mixer will give a better recording result. However there is a midi out port only no in port , is it possible to still use this keyboard with windows 7? Does the keyboard have its own power supply? If you are not using the USB cable, then you will need to power it from an external power supply. You might have more than one device to connect up. You might only want to tie up one USB port. The DAWs do not recognize the signal too. If I restart my keyboard the same thing happens. ANy ideas for a fix? I am purchasing Focusrite Scarlett 2i2 USB Audio Interface. You will connect the interface to one USB port, and then connect the Yamaha to another. You can transmit MIDI data direct from the Yamaha. You will be able to trigger from the Yamaha and use it as a controller you may need to turn the volume down in church if you are using software rather than the sound of the keyboard! You want MIDI data to go out of your controller and in to your sound module. No, you connect the audio output to an audio mixer input. And then you connect the mixer outputs to the inputs of your amplifier. Same thing with MIDI. I also learned that Channel 10 is usually reserved for percussion. But for the life of me, I have been unable to unearth which instruments the other 15 are relating to. So if I want to play some virtual musical instrument, on my MIDI controller, are Channels the right place to begin? And if so, how to decide then which Chanel would be suited to or suitable for , say, this trumpet,of my previous contribution? And, following up on this, in what manner do things like Program Changes and Banks fit in? The voices can be anything you care for and limited only to the instruments you have available within your software. So in your SOFTWARE you need to load in any instruments you have available, select the channel and then output to that channel from your keyboard. You can send program changes within a track which will change the instrument or patch to another one. I own a brand new M-Audio Keystation 88 MkII, MIDI Controller, since a couple of days. And playback of this I wish to capture — not on some DAW, but on my Zoom R16 digital 16-track recorder. The biggest hurdle, has been setting up MIDI, on Keystation 88,. But no luck at all, so far. The manual coming with the Keystation is frustratingly basic, in this regard — thus adding considerably to already great confusion. I had hoped to make some music, these past five days; instead, those were spent attempting to dig up, online, some tutorial explaining — to absolute newbies like me — from where exactly to start and how to move forward, step-by-step. But wherever I looked, I was pelted with horrendously impenetrable gobbledegook — without exception. I am now buying him a Roland E09in. However he wants to record his singing on his laptop for playing back later. Or anything additional is required? Get one with line in to connect the Roland and mic in to connect the mic. For just simple recording of different tracks, Audacity would be good. Most branded interfaces also come with recording software as well. If you purchase an interface, make sure it has phantom power if you want to connect a condenser mic. It used to be possible to get a MIDI-Gameport cable which would allow you to connect a MIDI keyboard. I used to sell them, but eventually the supply dried up. However, you might, if you scour secondhand sites, be able to come across one. My friend has a casio keyboard and has one lead that is a midi that plugs into the keyboard and the other end is a usb that plugs into the pc, and then he plays the keyboard and it records using a daw prog on the pc. Now, im looking at getting a yamaha psr e 303 and im struggling to find a lead. The only ones seem to be the ux16 that has some type of interface and two leads coming out. Dont understand why i can t find a single cable with the round midi plug for keyboard and a usb on the other end for pc just as one cable. I think the UX16 is very expensive — if it is still available. You might find the Roland um-one mk2 is more cost effective, but still very high quality and branded. I want to be able to hook it up to my computer to layer my music. It only has a usb port for midi. Will I be able to play a song and record it to my computer and then play it back and put another layer on top? I would like it to feel like I am playing with another musical instrument. Are there keyboards which will receive and play midi inputs? If so, what connections are used? So as a start, take a look on the Korg site, nearly all their keyboards and synths have MIDI in and out. I LOVE YOU JANE!!! Now I feel stupid because I thought it was hooked up right the whole time. Anyway thanks I owe you one. Obviously a studio soundcard will give much higher quality results, but for getting going, no, you can manage with what you have already got. My keyboard, a simple YAMAHA, only has one USB type B port. I have previously connected the keyboard to Garageband DAW on the laptop via USB, just using the downloadable driver from Yamaha and it seems to be running fine. Is there an advantage to connecting direct to the Babyface apart from the fact that I will use less USB inputs? Should I need to change anything to utilise the midi input on the Babyface. What is the best type of cable to buy? It should all be plug and play should it not? I Would appreciate your advice. Is it not USB only as you describe? If it is a keyboard that makes sound, then you would be able to record the actual sound via line out. Without more info cannot say exactly which cable. I have now been using the Midi piano and the babyface together in the same DAW Garageband on the laptop so no real problem there. The piano just connected type B Midi to type A USB on the laptop as normal. I have solved that issue. I guess there is no real advantage to going into the 5 pin midi plug directly on the baby face? The thing is, there may be advantages to being able to enter the babyface, as the Total Mix software that interacts with the Babyface unit is very powerful and it may give me further ways to use the Midi pathways from the keyboard. That was my question can I actually go from the USB type B port OUT on the keyboard, to the two Midi 5 pin plugs that are attached to the Baby face DAC. I cannot get them to communicate or my PC to recognize it as a MIDI controller. Are there certain drivers I need? Or should it automatically work? There is a link below on the Yamaha Synth site which takes you through setting up the S90 for Cubase, you should be able to get it working on Mixcraft if you follow the steps. Make sure you get your driver off the Yamaha site directly. Do NOT use a search engine to find drivers randomly on the internet! I have known MIDI interfaces to fail on just one part only though — ie they appear to install fine, but either the In or the Out does not work. If you have bought a branded interface then check the manual, and maybe post a support request to the manufacturer to make sure you have installed it correctly. I will be connecting it to my PC at home. I have 2 questions, please. The keyboard has both midi and usb outputs. The MTrack Plus has Midi connections. I am using the M-Track for guitar and bass as well. My question would be is it better to connect the keyboard using the midi through the M-Track or directly to the PC through the USB? The PC is new and has USB 3 inputs and plenty of cpu and RAM. I have a computer and emedia software, not yet loaded but it does not seem to have the lighted key feature I am looking for according to the sleeve although I may be incorrect on this point. Please tell me some popular suggestions on software and keyboards I see Casio has a model. Also, does the software have to support the lighted keys feature? What do I shop for? Am I missing any essential part? I think, though, you will have to use them with the Casio Step up Lesson System as far as I can see. There is a bit more detail about the Casio system here. I have the GSI VB3 software in my pc laptop hosted by VSTHost. I want to make a double manual B-3 organ. My axiom is on top and plugged into the lap top. I have sound and an expression pedal working. I have the keystation on the bottom set to midi channel 2 going from the midi out of the keystation going into the midi in of the axiom. No sound from the bottom keystation? What am I missing? Can you figure this out? You will need to have two MIDI tracks armed in your software, one triggered from port 1 and one from port 2. The Axiom effectively acts like an interface on the MIDI in port. Here is a link to the manual. Thanks for the response. Get the upper manual to take the midi out from the bottom manual to switch to midi merge at the upper manuals midi in port internally. The two keyboards need to have midi channels set to channel 1 for the top master and channel 2 for the bottom sub manual. I keep reading the M-audio Axiom 61 manual and this is what worked to get a double manual with expression pedal using GSI VB3 software and a PC sounds great by the way. I plugged my bottom manual M-audio Key Station 61 midi out into the midi in of the M-audio Axiom 61 and switched the bottom manual M-audio Key Station 61 to midi channel 2 inside the Key Station controller. The upper manual is set to channel 1 automatically I guess. The expression pedal just plugs into the M-audio Axiom 61 expression pedal jack and is automatically connected to the VB3 software. I now have a fully functioning B-3 Organ with Leslie and expression pedal for a fraction of the cost of a commercial clone wheel and none of the weight of a real B-3 and Leslie. Now on to cannibalizing a 2 octave kybd controller to make a pedal board. The very cheap unbranded ones can be very temperamental. The other issue is that your keyboard is quite an old one now. I hooked up my Ipad to my Roland FP7 via USb so my son could learn piano via software. I tried resetting to no avail. Is this a common problem? Any help is appreciated. It is quite an old keyboard though, are you connecting it directly up to iPad via the USB? I think you may have read the manual very carefully to check if there are any switches or settings you need to adjust, and also might be an idea to contact Roland support directly as this is quite a specific question. In general it is not a common problem as far as I know. I have a Casio Privia PX310. My boyfriend just bought me the M-Audio M-Track Plus with Pro Tools. I have a Toshiba laptop too. I want to use my keyboard to record with my Pro Tools software. Which cord do I need to connect my keyboard to the M Audio? I do want all 3 to communicate and record. I am utterly stumped. M Audio has a guitar line connect and a mic input connect. Do I utilize these?? Thank you in advance for your time and considerate patience. You have two options depending on what you want to do. If you want to use your Casio as a MIDI controller then you need a couple of these: If you want to record the actual sound of your keyboard via the line on the M-Track Plus then you need two standard jack cables — or a dual cable like the one below. Switch to line signal. Good luck with that then! I hope you are well. I can record in Pro Tools, but the play back comes through my keyboard, and not my computer speakers. They are just cheap, computer speakers with no settings. Why is it doing this? I can record in IGNITE, and playback through computer speakers which plays the actual recorded sounds, but it is so crackly and skips. Can I fix these skips and such? The recording actually sounds good despite this. Do you have any advise? It will be worth installing ASIO4ALL if you are using a PC and setting up the buffer size etc. A lot of your issues are to do with routing. The reason you are getting skips and crackling in Ignite will be to do with not using the MTrack to monitor the sound I think. With Pro Tools it sounds as if you are using the keyboard as the MIDI input and output device, which is why the sounds are coming back out through your keyboard. I was able to get the system plugged in and recording, but now I have a new issue. Perhaps you have an answer? I have an MAudio MTrack Plus, using Pro Tools Express and Ignite software. I have a Casio Privia 310 Keyboard. My computer is a Toshiba Laptop. Here are my questions: 1- I am able to record in Ignite, with all the sounds, but the play back is super crackly and it pops a lot. The recording is great and Ignite is super user friendly, but the playback sounds awful. The playback from the Ignite recording comes through my plugged in computer speakers. I have them plugged in the MBox. Any suggestions to fix the pops and cracks? Because of this, it plays back the sound that the keyboard is set on, not the sound it was recorded in. So Ignite plays back through the computer speakers, but Pro Tools plays through my Casio Keyboard?? My speakers are cheapy computer speakers. Do I need different ones? Any thoughts you have are greatly appreciated Jane! I have been watching YOUTUBE videos and have not found a solution. Thank you very much! You have an MBox and an MTrack? Make sure you only use one device. If that is the case, then go to the ASIO settings and adjust the buffer size etc. By adjusting the settings you should be able to get a good recording and playback. Try headphones to see if they are better than the speakers in terms of quality. But do make sure you are just using ONE input and output device, and that you are not routing the sound out from a different place to where you are recording. My husband and I have been trying to figure out how to get his keyboard to work with Cubase 7. We have hooked up his Kurzweil K2500X with his Windows 7 computer using a USB to MIDI cord, and have plugged everything in exactly how you have said, however, we can not get the program to register that the keyboard is plugged in. We have also tried it with Garageband and tried every USB port, and still have the same problem. Thanks so much for any help you can give! Is it a branded one or not? The cheaper unbranded ones are notoriously unreliable. There is a useful article here that helps you decide if the interface is working, and also how to update Windows drivers if the interface is working but just not being recognised correctly. If you find the interface is not working at least you know that is the problem. What do you think of the Samson Carbon 61? Would you advise something else in this category? The Samson Carbon 61 would be a good choice. Just speakers and headphones or would I be temporarily able to use the notebook speakers? Thanks a lot and sorry for such a long issue. Stay away from the M-Audio Keystation. You can just use your built in sound card for now, the Mac Operating System is very efficient and I am sure you will get good results just with your notebook speakers. By the way, most keyboards around the size you are talking about have 61 keys 5 octaves plus a note. I was planning to buy a Novation Launchkey 25 MIDI Keyboard Controller — which comes only with a USB to USB connection. My question is, is there no way I can connect the Novation via the interface for improved quality? But you should find it will work fine alongside whichever interface you pick. As it is only a controller it will not have any effect on the sounds you make. I bought a USB to Midi cords but my question is how do I play my midi files? My question is that do will I need anything else to connect these instruments? But how to do that? It dont have any inbuilt pickup so is it better to simply record with a high fidelity microphone or a pickup gives a better quality?? You should just be able to use the Samson mic to record the guitar and get a nice result. With the Graphite you can connect it directly to your computer via USB, or you could power it via USB and connect the MIDI out port to the MIDI in port of the M-Track using a standard MIDI cable. It comes with the USB to USB option. When I decide to buy a MacBook Pro and MainStage 3 where does the out put come from the digital piano rot eh Macbook Pro? I understand up to the point that I have to turn of the local sounds but where will the sound come from. That means everything you use to perform is on your Mac, giving you total control. Each Patch works as a self-contained audio mixer and router, so you can completely change direction mid-performance. One minute you can be playing some heavily distorted guitar with a full backing band. And the next you can be creating bass loops with an external synth against an Ultrabeat drum pattern. There is no module either. If you have not done this kind of thing before then Mixcraft is a good starting point you can download the demo from acoustica. They have a less steep learning curve that some of the other packages and it does seem that you are just starting out. For good quality vocal recordings you will want to look for a good large diaphragm condenser microphone. You will also need a stand, a shockmount if you can stretch to it and you might want to think about a small stand mounted vocal booth see the range from Editors Keys who do a complete range. Hope that helps a bit. The card is damaged and I can not seem to find another — ebay searches etc come up with nothing. Since my laptop and keyboard do not have usb connection do you have a suggestion or solution for me? I am not actually familiar with Notation Musician software specifically but that is how most applications would work. Depending on the keyboard sometimes you can just make a USB connection direct to computer and it has built in interface. I have a Yamaha PSR 6700 keyboard. I had a music synthetiser to go with it via a MIDI cable. One day, the synthetiser stopped working. I sent it away for repair. Used it for a few months and it blew again. The synthetiser I am talking about is a kind of a stand alone black box that connects to the keyboard via a MIDI cable and it usually has over 200 voices that can be played on the keyboard or even blend with the keyboard own voices to bring out an incredible combinations of beautiful sounds. If there are, where can I find them? I quite like the look of the Roland SonicCell, or the Chord Pianobox II has a nice set of GM intruments. Nord do a lot of tabletop synths. I guess it depends on the kind of sounds you want. There are plenty of secondhand bargains up for grabs on eBay, these come up in the Google Shopping search and of course directly on eBay. But the good news is yes, you can definitely still get them! You sure know where to look, yes? I checked the Roland BK-7m and the Integra 7. I am not sure if these can be connected to my Yamaha PRS 6700 keyboard and that they will work for years without burning themselves out, like my previous sound module synthetiser. I will contact Roland and see what they say. So, I better treat the next purchase more carefully. Thanks for suggesting a product for me. Probably the best thing is to look through our when looking for a MIDI keyboard to find one that fits your needs. If you stick with a good brand then check out the secondhand market too, as they are pretty simple and I have a couple of good quality keyboards from M-Audio that have lasted years. BUT if you actually want to record the SOUND your keyboard is making then you will need to refer to our article on as you need different hardware to achieve that. Does this mean taking the sound that the keyboard has and synthesizing it by running through a computer software? I think the sounds on my keyboard are varied enough, but in addition to the basic operating manual, which I struggle with, a HUGE book about changing all the parameters of the sound waves et al also came with it and I am overwhelmed by even the thought of trying to read it again. I have a Juno-Gi and some Roland RD300SX and RD300NX stage pianos. All I have done so far is plug the 300 OUT to Juno In and use Juno sounds. It works on the RD 300SX and I love that I can also add to the mix by playing directly on the Juno while someone else is playing the 300 through it. However, the set up does not work properly and does weird stuff when using the RD 300NX. I want to begin to enter into Noteworthy Composer the easy way. So far, I have written about 300 pieces using the computer keyboard, and look forward to any help I can get. Other people want to use their hardware as a controller and use virtual instruments in the software to make the sound. The hardware is then just used to record the performance data ie the notes played etc. If you want to use Noteworthy then you need to get your keyboard operating as a MIDI controller, and you should be able to hear what you have done via the software. You could either use it as a controller if you connect it up via MIDI to your computer, then use software with virtual instruments to generate all the sounds you want. And if you wanted the sound of the Roland in there, you would also need an audio interface and the right cables to make an audio recording of the sound of the keyboard. In a DAW you could record the audio and the MIDI info, then add in sounds to the recording. Buying a MIDI controller would not immediately enable you to add sounds to your piano. But some people find using a little USB controller with their computer is easier and more convenient then hooking up a large digital piano. Hope that helps a bit. I purchased A midi keyboard that has two outputs: 1. When I connect the keyboard using A midi cable to the audio interface midi out to midi in the keyboard doest get power to work. The audio interface is Audio Kontrol 1 by N. I, and the keyboard is Carbon 49 by Samson. You will also have to make sure that you are using the audio interface as the default audio output. I have installed garageband, lmms, and mixcraft so im seriously confused and worried it may not pick it up. Just only connect the one MIDI port up. It should work fine. The software will recognise the interface and thus any signals sent through it from the keyboard. Make sure you have a power supply for the casio, it will not be powered by the MIDI-USB cable. However it will not power your axiom. You will either need an external power supply for your axiom an optional extra or you will need to connect up the USB cable from the axiom to power it. As the Axiom is a USB controller keyboard, I am not sure why you would wish to use the MIO with it? If you are having difficulty checking that your interface is connecting properly then see our article on testing your MIDI device: Although it refers to a MIDI controller, the same advice will do for a MIDI interface. Use MIDI-OX as described on that page to test the connection.
In the years immediately after the 1983 ratification of the MIDI specification, MIDI features were adapted to several early computer platforms. If you follow the instructions in our page on testing a MIDI device — and I know you have already looked at this — make sure you are running the tests using the A6 as the device. Look to make sure it has a MIDI port. I notice that this model has now been superseded by the Aleses V25, but the V25 is USB only. Routing setups can be created using midi cable for keyboard software, stored in memory, and selected by MIDI program change commands. You first need to establish that it has got a means of connecting with your computer. Software synthesis' roots go back as far as the 1950s, when of wrote the programming language, which was capable of non-real-time sound generation. Although the MIDI cable is supposed to connect pin 2 and the braid or foil shield to chassis ground, it should do so only at the MIDI out port; the MIDI in port should leave pin 2 unconnected and isolated. Synthesizers and samplers contain various tools for shaping an electronic or digital sound.
